CAE (ANSYS, etc.) Interoperability and Mesh Creation
This explains how DXF is used in CAE (Computer-Aided Engineering), especially analysis software like ANSYS and Abaqus, and its relationship with mesh creation.
Role of DXF in CAE
In analysis software, DXF is mainly imported as "geometric boundary conditions (2D)" or "cross-sectional shapes".
| Analysis Software | Main Use | DXF Handling |
|---|---|---|
| ANSYS (SpaceClaim / DesignModeler) | Fluid/Structural Analysis | Import 2D cross-sections, base for 3D modeling |
| Abaqus | Structural Analysis | Import as sketch |
| COMSOL | Multiphysics | Import 2D shapes |
Process of Creating Mesh from DXF
To perform analysis, imported geometric shapes need to be divided into "meshes (finite elements)." When creating meshes directly from DXF, follow these steps.
- 2D Shape Import: Read outer contours from DXF.
- Cleanup (Important): Delete DXF-specific "tiny gaps" or "duplicate lines." If these remain, mesh generation will fail.
- Face Creation: Define areas surrounded by lines as "faces."
- Mesh Generation: Divide into triangular or quadrilateral elements by the software's auto mesher.
Advantages and Disadvantages of DXF in CAE
Advantages
- Optimal for 2D Analysis: Lightweight and easy to handle for analyses that can be completed with cross-sections alone, such as electromagnetic field analysis or 2D structural analysis.
- Utilizing Old Assets: Can directly use past 2D drawing assets for analysis.
Disadvantages (Traps)
- Lack of Topology Information: DXF is just a "collection of lines" and doesn't have information about which are "closed areas." Therefore, manual work to recreate faces after import often occurs.
- Not Suitable for 3D Analysis: When importing 3D solids via DXF, "leaks (gaps)" occur during mesh generation, and the probability of errors is very high.
Techniques to Improve Compatibility
When passing DXF to CAE software, note the following points.
- Polyline Conversion: Instead of scattered
LINE, useLWPOLYLINEwith closed loops, making it easier for software to recognize faces. - Avoid R12 Format: In R12, curves are divided into short line segments, causing meshes to become unnecessarily fine or shapes to distort. R2000 (AC1015) and later is recommended.
- Utilize Layers: Separate analysis target shapes and auxiliary lines like dimensions into different layers, and have analysis software ignore unnecessary layers.
Recommendations for CAE Engineers
- For 2D Analysis: DXF is a strong option. However, always check for "line duplicates" and "gaps" on the CAD side before output.
- For 3D Analysis: Instead of DXF, use STEP (.step) or Parasolid (.x_t) formats. These maintain topology (connection relationships), dramatically reducing errors during mesh creation.