Skip to content

Linetypes (Dashed/Dotted) and Construction Lines ​

This explains how "linetypes" that change line appearance and "construction lines" used as drawing guides are handled in DXF.


1. Linetypes ​

Patterns like solid, dashed, center lines, etc.

Mechanism ​

  1. Definition: In the LTYPE table of the TABLES section, define pattern names (DASHED, etc.) and dash/space lengths.
  2. Reference: Specify defined linetype names in group code 6 of each entity (LINE, LWPOLYLINE, etc.).

Group Code 6 Specification ​

  • ByLayer: Use the linetype set in the layer as-is (default).
  • CONTINUOUS: Solid line (always exists).
  • DASHED: Dashed line.
  • CENTER: Center line.
  • DOT: Dotted line.

Linetype Scale ​

A multiplier to adjust pattern density according to drawing size.

  • Group Code 48: Multiplier for individual entities.
  • $LTSCALE: Common multiplier for the entire drawing (header variable).

2. Construction Lines ​

Lines that are infinite or semi-infinite, used to assist drawing.

XLINE (Construction Line) ​

  • Features: A straight line extending infinitely in both directions.
  • Group Codes:
    • 10, 20, 30: Passing point.
    • 11, 21, 31: Direction vector.
  • Use: Center lines, grid reference lines.

RAY (Ray) ​

  • Features: A straight line extending infinitely in only one direction from a start point.
  • Group Codes:
    • 10, 20, 30: Start point.
    • 11, 21, 31: Direction vector.

3. Implementation Notes and Best Practices ​

① Missing Linetype Definitions ​

Even if DASHED or other linetypes are referenced in DXF, if their definitions don't exist in the TABLES section, many software display them as solid lines.

  • Solution: When outputting your own DXF, be sure to include referenced linetype definitions in the LTYPE table.

② Printing Construction Lines ​

XLINE and RAY are very long and can be annoying when printing.

  • Practice: It's common CAD practice to create a dedicated layer for construction lines (e.g., DEFPOINTS layer or custom AUX layer) and set that layer to "non-printing."

③ Handling in Machines ​

Machines like laser cutters or CNC often cannot correctly process infinite XLINE or RAY.

  • Solution: When exporting as machine data, it's recommended to delete construction lines or convert them to regular short LINE.

Summary ​

TypeRoleExpression in DXF
Dashed/Dotted LinesVisual patternLTYPE table + group code 6
Infinite LinesDrawing referenceXLINE entity
RaysDrawing referenceRAY entity
Auxiliary LayersCommon managementManagement in LAYER table

Related: Tables and Layers | Common Entities | Common Pitfalls

MIT License